Agitated Nutsche Filter & Dryer

  • Home -
  • Agitated Nutsche Filter & Dryer

Amar has been leading manufacturer and exporter of lab scale agitate nutsche filter & dryer systems in India for past many years

  • Volume: 1 ltr to 100 ltr slurry volume
  • Filtration Area: 0.005 m² to 0.2 m²
  • Design pressure: -1 to 4 bar
  • Design Temperature: -20°C to 150°C
  • Materials: SS316, Hastelloy C, Inconel etc.
  • Surface finish: Ra < 0.8 μm or 400 grit inside/electropolishing
  • Application: These ANFD systems are used for drying and filtration of various media including precious metals, various chemicals from slurries, pharmaceutical Intermediates, Food, flavours & fragrance industry, Edible oil deodorization & deacidification, Hazardous materials filtration, Moisture removal & solvent recovery, Precious metal & other catalyst recovery, Fine & speciality chemicals, Polymer devolatilization, Microsphere separation & purification in R&D centers, pilot plants & manufacturing facilities of fine & speciality chemicals, bulk drug (API) pharmaceuticals, dyes, intermediates, paints, oils, agrochemical, petrochemicals, oil & gas, chemical research institutes / colleges etc.
  • Removable filter basket, size from 5μm to 20μm
  • Transport & separation process takes place in single unit
  • Reduced product exposure as all operation takes place in single unit
  • Real-time model-predictive process control for the comparison of different agitation regimes & different operating conditions such as vacuum pressure, nitrogen flow, jacket temperature & cake volume, together with comparison of different solvents
  • Vacuum contact drying & through-circulation convective drying possible
Model ANFD 1
Filter Area 0.005m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 1 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve
  • vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Manual agitation arrangement with effortless clockwise and anti-clockwise movement.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS panel with digital temperature indicator and high temperature alarm.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top
Model ANFD 2
Filter Area 0.008m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 2 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • Pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve,
  • Vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Motorized agitation arrangement with bi-directional rotation and effortless up-down movement.
It consists of a 1⁄4 HP AC motor and gear box.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS control panel with digital temperature indicator and high temperature alarm with variable frequency drive for 5 to 100rpm (for 2Ltr.) infinitely variable speed, digital rpm indicator and bi-directional rotation.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top
Model ANFD 5
Filter Area 0.02m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 5 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • Pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve
  • Vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Motorized agitation arrangement with bi-directional rotation and effortless up-down movement.
It consists of a 1⁄4 HP AC motor and gear box.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS control panel with digital temperature indicator and high temperature alarm with variable frequency drive for 5 to 25 rpm infinitely variable speed, digital rpm indicator and bi-directional rotation.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top
Model ANFD 5
Filter Area 0.02m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 5 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • Pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve
  • Vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Motorized agitation arrangement with bi-directional rotation and effortless up-down movement.
It consists of a 1⁄4 HP AC motor and gear box.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS control panel with digital temperature indicator and high temperature alarm with variable frequency drive for 5 to 25 rpm infinitely variable speed, digital rpm indicator and bi-directional rotation.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top
Model ANFD 5
Filter Area 0.07m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 25 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • Pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve
  • Vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Motorized agitation arrangement with bi-directional rotation and effortless up-down movement.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS control panel with digital temperature indicator and high temperature alarm with variable frequency drive for 5 to 25 rpm infinitely variable speed, digital rpm indicator and bi-directional rotation.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top
Model ANFD 5
Filter Area 0.13m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 50 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • Pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve
  • Vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Motorized agitation arrangement with bi-directional rotation and effortless up-down movement.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS control panel with digital temperature indicator and high temperature alarm with variable frequency drive for 5 to 25 rpm infinitely variable speed, digital rpm indicator and bi-directional rotation.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top
Model ANFD 5
Filter Area 0.20m2
Material of Construction Wetted parts: SS 316
Non-wetted parts: SS304
Volume 100 Ltr.
Design Pressure Vessel: -1 to 4 bar Jacket : 6 bar
Design Temperature Vessel: -20°C to 150°C Jacket: -20°C to 150°C
Nozzles & fittings
  • Compound pressure gauge (-1 to 6 bar)
  • Pressure relief valve
  • Ball valve with removable funnel for slurry inlet
  • Dry air/N2 purging valve
  • Vent valve
  • Filtrate outlet/drain valve
  • K-type temperature sensor.

Note : All valves shall be ball valves, made of SS316 & valve end connection shall be Tri-clover connection.

Vessel and Lid sealing Viton O-ring with quick opening TC clamp.
Agitation Motorized agitation arrangement with bi-directional rotation and effortless up-down movement.
Shaft sealing Mechanical seal.
Filter Basket 5μm pore size filter basket made of SS316 with support.
Stirrer 2 bladed turbine impeller
Heating SS304 jacket
Electric Control Panel SS control panel with digital temperature indicator and high temperature alarm with variable frequency drive for 5 to 25 rpm infinitely variable speed, digital rpm indicator and bi-directional rotation.
Power supply 1ϕ, 220VAC, 50Hz
System Mounting Table Top

Enquire Now