Material

Alloy 600/625 / Inconel 600/625

Inconel 600 / 625 is a nickel–chromium non-magnetic high temperature alloy that offers excellent properties of high strength & corrosion & heat resistance. Due to its high nickel concentration, the alloy is essentially impervious to chloride-ion tress-corrosion cracking and resistant to both organic and inorganic compound corrosion. Chromium offers resistance to oxidizing onditions in corrosive solutions or at high temperatures, as well as resistance to Sulphur compounds. Inconel 600 / 625 can only be strengthened and hardened through cold work; precipitation hardening is not an option. Due to INCONEL alloy 600's adaptability, it is used in a wide range of applications including temperature.

It offers excellent resistance to:

  • Caustic acids & chlorides at high temperature & pressure when sulfur compounds are present.
  • Reducing-oxidizing environment
  • Sulfur free gases
  • Very high temperature

 

Chemical Composition of Inconel 600:

Element Percentage
Nickel ( Ni ) 73% - 80%
Chromium ( Cr ) 14% - 17%
Iron ( Fe ) 2%
Carbon ( C ) 0.15%

Note: Maximum Design Temperature: 482°C

Chemical Composition of Inconel 625:

Element Percentage
Nickel ( Ni ) 58%
Chromium ( Cr ) 22% - 23%
Iron ( Fe ) 8% - 10%
Carbon ( C ) 0.15%

Corrosion Rating:

RATINGS - 0:Unsuitable 1:Poor to Fair 2:Fair 3:Fair to good 4:Good 5:Good to Excellent 6:Normally Excellent

Materials Non-oxidizing or reducing media Liquids Gases
Acid solutions excluding Hydrochloric, phosphoric, sulfuric Neutral solutions, e.g. many Non-oxidizing salt solutions, chlorides, sulfates Alkaline solutions Oxidizing Media Halogen & derivatives
Caustic & mild alkalis, excluding ammonium hydroxide Ammonium hydroxide & amines Acid solutions, e.g. nitric Neutral or alkaline solutions e.g. per sulfates, peroxides, chromates Pitting media, acid ferric chloride solutions Halogen Hydrogen halides, dry, e.g., dry, hydrogen chloride
Moist, e.g. chlorine below dew point Dry, e.g. fluorine above dew point
Alloy 600/625 3 6 6 6 3 6 1 2 5 3

Note: Maximum Design Temperature shall depend on the corresponding pressure requirement.

Enquire Now